Wheatstone IP-12 Console

Quick details

£POA

IP-12 control surface with IP88-3cb BLADE engine, the perfect entry into Audio-over-IP networking.

SKU: IP-12 Categories: ,

Description

Audioarts IP-12 Console mainThe Wheatstone IP-12 is a 12-fader control surface that taps into the power of the WheatNet-IP Intelligent Network through its IP88-3cb console audio BLADE engine to make a perfect low-cost, small-footprint solution for any studio. Each of its 12 input modules is equipped with an LED source name display and an A/B source selector and sources can be set via a rotary encoder in the master section. Each input module has access to four programme busses and has cue and talkback switches. A 100mm long-throw fader and lighted channel ON/OFF switches completes the module.

The IP-12 control surface connects via Ethernet to its audio engine, the Wheatstone WheatNet-IP ip88-3cb console audio BLADE, a powerful 1RU device containing the console’s digital signal processing, input, output and logic circuitry. The  ip88-3cb has no fans and may be located either next to the console or at a remote location.The master section offers control room, studio and headphone controls with source selection and an on-board headphone socket and amplifier.

Timer controls, a master talkback button and a built-in cue speaker with volume control are provided. There are four event switches and six programmable buttons available for user functions. The meter bridge has three stereo pairs of bright 30-segment horizontal LED bargraph meters, as well as an on-board timer with controls located in the master section.

Includes

12 Fader IP-12 frame with:-

  • 12 IN-12 Input Module
  • 1 x CR-12 Control Room Monitor Module
  • 1 x SC-12 Studio Monitor Module
  • 1 x SPS-A3 Power Supply
  • 1 x IP-12 User Manual
  • 1 x ip88-3cb Console Blade Mix Engine with 8 mono (4 stereo) analogue line inputs, 2 Mic pre-amps (patchable to 2 analogue line inputs)
  • 4 AES/EBU inputs, AES/EBU outputs, 4 analogue outputs with Cue and headphone outputs on RJ45 and 1/4” socket
  • Control room and studio monitor outputs are on XLR’s

Additional Inputs and Outputs can added with ip88-3a, ip88-3d, ip88-3ad, ip88-3m and M4IP-USB I/O Blades over gigabit Ethernet network.